skip to main text

Copying Four Pages to Fit onto a Single Page

When you select 4-on-1 copy for Layout in Copy, you can copy four original pages onto a single sheet of paper by reducing each image. Four different layouts are available.

figure: Touch screen

Select 4-on-1 copy, then tap OK.

If you tap Advanced with 4-on-1 copy selected, you can specify the orientation and the order of the original.

Note

  • The order is the same regardless of the orientation.

  • When you select Upper-left to right

  • When you select Upper-right to left

  • When you select Upper-left to bottom

  • When you select Upper-right to bottom

After selecting the order, you can select whether you use the preview screen. If you tap ON, the preview screen is displayed so that you can check the orientation.

Note

  • This function can be used in combination with Two-sided copy.

    If you use this function in combination, you can copy eight original pages on one sheet of paper. In this case, four original pages are copied on each side of paper.

    If you use this function in combination, select 2-sided for 2-sidedPrintSetting, then select the orientation and the stapling side of print paper on the Print settings screen.

    For details on two-sided copy function:

    Two-Sided Copying

When Loading the Original on the platen glass:

  • Before scanning:

    When the preview function is activated, the machine starts pre-scanning before scanning the original. When pre-scanning is finished, the screen below (preview screen) is displayed on the LCD.

    figure: Touch screen
    1. Tap to rotate the original by 180 degrees.

    2. Tap to start scanning the original.

    3. Tap to rescan the original.

  • After scanning:

    The screen below appears after scanning each sheet of original.

    figure: Touch screen
    1. Tap to start scanning the original.

      Remove the sheet of original from the platen glass after scanning and load the next sheet on the platen glass, then tap Scan.

    2. Tap to start copying the original already scanned.

    Note

    • You can add the copying job while printing.

      Adding the Copying Job (Reserve copy)

    • If you use this function in combination with Two-sided copy, the screen above is displayed after scanning the fourth sheet of original is complete. Follow the on-screen instructions to scan the rest of originals.